Rockwell Automation Publication 1756-UM536A-EN-P - April 2012. The ControlLogix® counter module counts incoming pulses and returns accumulated count, instantaneous and average frequencies, and instantaneous and average pulse width values. The module has two configurable On/Off windows per counter that can be used to affect outputs on a 1756.
- Controllogix System User Manual Publication 1756-um001 1
- Controllogix 5000 Programming Manual Pdf
- Controllogix System User Manual Publication 1756-um001 2017
- Motion Um001
- Controllogix Plc Manual
- Controllogix System User Manual
- 1756 L83e User Manual
- ControlLogix System User Manual, publication 1756-UM001. Detailed information on how to install, configure and troubleshoot the. ControlLogix Sequence of Events module in your ControlLogix application. FLEX I/O DC Power Supply Installation Instructions, publication 1794.
- For ControlLogix controller information, refer to ControlLogix System User Manual, publication. Slot Status Bits: The Slot Status bits display the connection status for each of the POINT I/O modules that use a rack-optimized connection. – Bit 0 is reserved for the adapter and always reports a value of 1.
ivPreface
The following documents contain additional information concerning Rockwell
You can view or download publications at
. To order paper copies of
technical documentation, contact your local Rockwell Automation distributor or
Common Techniques Used
Controllogix System User Manual Publication 1756-um001 1
The following conventions are used throughout this manual:
•Bulleted lists such as this one provide information, not procedural steps.
•Numbered lists provide sequential steps or hierarchical information.
ResourceDescription
A description and overview of the 1794 series FLEX I/O, FLEX I/O XT and
FLEX I/O Dual Port EtherNet/IP Adapter Modules,
Information on how to install the FLEX I/O redundant EtherNet/IP adapter
Catalog No. 1794-AENTR, 1794-AENTRXT
publication 1756-UM001
Detailed information on how to install, configure and troubleshoot the
ControlLogix Sequence of Events module in your ControlLogix application.
Controllogix 5000 Programming Manual Pdf
FLEX I/O DC Power Supply Installation Instructions,
Information on how to install the FLEX I/O DC Power Supply
EtherNet/IP Embedded Switch Technology Application
Information on how to install, configure and maintain linear and Device-level
Ring (DLR) networks using Rockwell Automation EtherNet/IP devices with
EtherNet/IP Modules in Logix5000 Control Systems User
Detailed information on how to use EtherNet/IP modules with Logix5000
controllers and communicate with various devices on the Ethernet network.
Interconnect Cable Installation Instructions, publication
Information on how to install the extension cables.
Industrial Automation Wiring and Grounding Guidelines,
In-depth information on grounding and wiring Allen-Bradley programmable
Allen-Bradley Industrial Automation Glossary,
A glossary of industrial automation terms and abbreviations.
Advertising
Rockwell Automation Publication 1734-UM018B-EN-P - October 2013
69
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software Chapter5
10. Click OK.
At this point, your POINTBus status LED should be solid green. All the
yellow triangles in your I/O configuration should be gone.
yellow triangles in your I/O configuration should be gone.
11. Click OK to close the dialog.
12. Click File
12. Click File
→
Save to save the project.
Controllogix System User Manual Publication 1756-um001 2017
Access Module Data
Use the following information to use the I/O adapter data in the ladder logic
program:
program:
•
POINT_IO_Adapter — the name you gave to your EtherNet adapter
•
# — slot number of POINT I/O module
•
C — configuration, I = input, O = output
Use the controller tags in your ladder program to read input data or write output
data.
data.
•
For ControlLogix controller information, refer to ControlLogix System
User Manual, publication
User Manual, publication
Motion Um001
.
•
Controllogix Plc Manual
Slot Status Bits: The Slot Status bits display the connection status for each
of the POINT I/O modules that use a rack-optimized connection.
–
of the POINT I/O modules that use a rack-optimized connection.
–
Bit 0 is reserved for the adapter and always reports a value of 1.
–
Controllogix System User Manual
Each of the other bits (1 to 63) correspond to a POINT I/O module
that you install in the POINT I/O backplane.
that you install in the POINT I/O backplane.
1756 L83e User Manual
–
In this example, we configured the 1734-AENT adapter for both rack-
optimized and direct connections.
The slot status bits indicate that we installed the module in slot 2 with it
operating correctly:
optimized and direct connections.
The slot status bits indicate that we installed the module in slot 2 with it
operating correctly:
0 = module participating with no errors and
1 = module not participating or connection error (typically, module
removed/missing)
1 = module not participating or connection error (typically, module
removed/missing)
Advertising
Popular Brands
Popular manuals